ADIPEC 2017: Visit Sami at WIKA booth

Meet Sami staff and see our products at WIKA stand

  • Date: 13 – 16/11/2017
  • Place: Abu Dhabi, UAE

You will find us in hall 13, Stand 13255

The Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) is one of the world’s most influential events for the oil and gas industry.
Situated at a cross roads of east meets west, ADIPEC is the largest oil and gas exhibition and conference in Asia, Africa, Europe, and the MENA region.
Make sure to visit the WIKA stand: besides discussing your specific solution for temperature-, pressure-, level-, flow- measurements as well as calibration, you will also find Sami Instruments staff, who will be eager to show you our valves and help you find your customized solution.
Entrance to the exhibition is free of charge.

Offshore Europe 2017: Sami products showcased at WIKA booth

Our new colleagues from WIKA Instruments Ltd. were present at Offshore Europe 2017, which took place in Aberdeen (Scotland) from 5th to 8th September.

SPE Offshore Europe is recognised by offshore E&P professionals as Europe’s leading E&P event, with 50,000+ attendees and 1,000+ exhibitors, from international market leaders to new innovative technology companies.

The staff of WIKA Instruments Ld. received some very interesting leads regarding Sami products during the fair.

See below some photos of Sami items at WIKA booth:

WIKA booth at Offshore Europe 2017

WIKA booth at Offshore Europe 2017

A display with Sami needle valves and manifolds

A display with Sami needle valves and manifolds

A perfect fit: WIKA gauge assembled to Sami monoflange double block & bleed with O.S.&Y. bonnet

A perfect fit: WIKA gauge assembled to Sami monoflange double block & bleed with O.S.&Y. bonnet

Mr. Stokes, Product Sales Specialist, Instrument Valves and Process Gauges, at WIKA stand

Mr. Stokes, Product Sales Specialist, Instrument Valves and Process Gauges, at WIKA stand


We’ll be pleased to meet you again in 2019!


Sami Instruments S.r.l. becomes a division of WIKA group

We would like to inform all our valuable customers and business partners that, after a long and profitable partnership with WIKA, on Monday April 3rd 2017, an agreement was signed between WIKA and the owners of SAMI for the complete acquisition of SAMI Group.


The transfer of ownership will be completed within the end of July 2017.


Click here to read the relevant press release.


Your reference contact persons will remain unchanged and they are available for any further additional information you may need.


Reschigliano, 12/4/2017

Mr. Luigi De Mitri

Vice President


Sami logo onda LOW RESWIKA logo
OTC 2017

OTC 2017

Also this year, Sami Instruments® will be an exhibitor in one of the most important fair of the Offshore field: OTC 2017, the Offshore Technology Conference in Houston, Texas.

OTC 2017 logo


The exhibition will be held in NRG ParkHoustonfrom 1st to 4th May 2017.


We’ll be pleased to meet you at booth no. 3261.

If you’re attending the exhibition and wish to schedule a meeting with our staff, please write us an e-mail at



Processteknik 2016: Sami represented by Euromekanik AB

Euromekanik received interesting feedback on Sami products at Processteknik

Euromekanik, our Swedish distributor for low pressure products, was present at Processteknik 2016, which was held in Gothenburg (Sweden) from 4th to 6th October.

Processteknik is Scandinavia’s largest trade show for the future of automation and process technology. It was first held in 2001 and has established itself as a cross-industry trade fair focusing on solutions rather than any particular industry. Visitors are technicians and engineers from management to operators who use process technology equipment and come from many industries – food, pharmaceuticals, pulp and paper, petrochemicals, refineries, paints, adhesives, other chemical industries and technical consultancies.


The staff of Euromekanik received some very interesting leads regarding Sami products during the fair.

See below some photos of Sami items at Euromekanik booth:

SAMI_euromekanik_processteknik-2 SAMI_euromekanik_processteknik


ADIPEC exhibition

Adipec 2016

Sami Instruments will attend the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC), which will be held in Abu Dhabi from 7th to 10th November 2016.

ADIPEC has become the world’s new meeting point for the global energy industry: it draws ever increasing numbers of exhibiting companies, international country pavilions, visitors and conference speakers from around the world and promotes meaningful and real discussions, knowledge sharing and networking with over 95,000 people.

Don’t forget to pay a visit to our stand in the Italian pavilion (booth# 2235): click here to download ADIPEC 2016 Floor Plan.

ADIPEC exhibition

SAMI manifold transmitter

Sami Instruments is official manifold vendor for Yokogawa Europe

Sami listed among official partners in Yokogawa Europe website

Sami has been supplying manifolds to Yokogawa for 5 years and in April 2015 signed a 3 year contract for the distribution of its products to all Yokogawa subsidiaries. We are therefore very pleased to be now listed among Yokogawa official partners in their website. Click here to see the relevant page.

We’re proud to serve all Yokogawa European affiliates and we are looking forward working with other Yokogawa subsidiaries in the near future.

Our assembly service enables our customers to send us their instruments and receive the complete assembly, with our needle valves and manifolds mounted on their gauges and transmitters and 100% tested, ready to be delivered to the customers.

SAMI manifold transmitter

An example of a Yokogawa transmitter assembled to our manifold



Sami registered with Saudi Ministry of Commerce

Sami has taken another important step towards Saudization

As part of our global business development and thanks to the cooperation of our exclusive partner SAUDI SALWA CO., Sami Instruments is pursuing its presence in the Kingdom of Saudi Arabia and in this framework recently obtained its registration in the Saudi Ministry of Commerce.


See below the relevant certificate.

Download (PDF, Unknown)

To keep updated on further steps regarding Sami presence in Saudi Arabia and in the Middle East, subscribe to our newsletter.

Panels and Systems

Panels and Systems: new section on Sami website

Sami also features a wide range of panels and systems

Thanks to the new distribution agreements with Protec and Pneumoidraulica Engineering, we’re pleased to feature also their items in our product range and in our website.

Take a moment to explore the new Panels and Systems section, featuring the main product range of both Protec and Pneumoidraulica:

Systems on cabinet


By clicking on the links above you’ll be able to view several pictures of the products, to download the relevant catalogues in pdf and to be redirected to our partner’s website.



Protec  is a company leader in the engineering and manufacturing of auxiliary systems for the mechanical seals (API 682) and Lube oil Systems (API 614), producing different types and formats of industrial equipment.
By using qualified suppliers, great experience and certified internal quality system (ISO 9001),
Protec ensures the production of reliable and modern technological solutions.
Protec takes care of both of the engineering and the production phases of complex systems, guaranteeing the complete conformity and compliance with the methods and the technical specification required by the customer.



Innovation and business initiative have been the main elements leading to the foundation of PNEUMOIDRAULICA ENGINEERING in 1994.
Its aim is to serve the Oil & Gas Industry with quality products and services, and its core business are pneumatic and hydraulic control systems, completely custom-designed, manufactured and maintained by PNEUMOIDRAULICA ENGINEERING.
Thanks to the long experience and the presence at customer’s site, the staff of PNEUMOIDRAULICA ENGINEERING is constantly trained for the design of new plants. The company is certified according to ISO 9001:2008. Among the most important products: Pneumatic and Hydraulic control systems, Gas sampling systems, Metal to metal pneumatic control valves, Pneumatic pressure switches for flow-line control, Fusible plugs, Excess flow valves for fusible plugs network, Pneumatic timers and indicators.


For any enquiries or information regarding panels and systems, please contact us!